24"W x 90° Powered Sprial Belt Curve [Incline] (Portec)
Product ID: 2069
PORTEC Model 34B25SP90 24"W 90-degree Spiral Belt Curve ~Incline~
The spiral belt turn powers materials up or down, handling a wide range of materials, including odd shaped and irregular bottom cartons. The units reduce the angle of incline and floor space, while maintaining product spacing and orientation. One way Transportation; No accumulation.
Nominal width: 24"
25" Belt Width/ 27.5" Between Frames/ 28.5" Overall Width / 10" Frame Depth
Inside Radius: 34"
Helix / Rise: 26"
Frame construction: Welded 12 gauge painted steel; stainless steel/washdown construction for special applications; models with a stainless steel frame may have a different frame height
Drive System: Positive-drive precision sidebow chain is attached to the edge of the conveyor belt to both drive and track the belt.
Belt drive chain: #50 sidebow steel chain with belt attachment links; design load 640 lbs.; ultimate strength 5420 lbs.;
optional nickel plated chain for special applications.
End Drive: Shaft mounted; Left Hand Outside drive at Charge end
Motor: 1.5 HP; C-face, 208/230/460/480 volts/ 60 cycle / 3 phase / totally enclosed. 15:1 reducer
Speed : unknown fpm - fixed
Conveyor belt: 2-ply black SBR-Rough Top; a wide range of optional belt materials available; laced belt seams. Color = black
End roll sprockets: Steel beveled-tooth sprockets to match #50 sidebow chain. 17, 27 or 40 tooth sprockets are used,
depending upon the conveyor frame height. Models with a stainless steel frame use 21, 24, 30 or 40 tooth sprockets.
Stainless steel or hardened tooth sprockets are available as an option.
End roll shafts: Turned, ground and polished 1045 or 1144 stress-proof steel.
End roll bearings: Precision, sealed for life, and fitted in a cast iron housing. Grease fitting for the self-aligning feature.
Nickel-plated housings are available as an option.
End rolls: Fabricated, all-steel rolls using spun-formed shells and weldable cast steel hubs. No lagging is required. Stainless steel or solid plastic rolls are available as an option.
Return wheels: Rubber covered wheels with precision ball bearings are positioned along a steel shaft or on hanger brackets.
Guard Rail: 12" high "L-profile" pan-fixed; both sides; 14 gauge painted steel.
Supports: H-style supports; elevation at top part of helix = 56" with +/- 2" of adjustment.