This was recently liquidated from a local distribution facility. It is in good overall condition with normal signs of use. It has been tested and is in good operational condition.
Rapistan/Dematic Model 405 Slider Bed Brake Belt Conveyor 30" wide x 4' LG; Horizontal Unit
USES:
This short unit is used in a system to provide a space or a gap between for product. It is place before inducts and merges to help provide proper spacing or gapping of product. One transportation; No accumulation
SPECS:
Nominal width: 30"
Length: 4' Nominal; 3'-10"' lin ft. with end assemblies
24" Wide Belt; 30.25" Overall Width; 5.25" Frame Depth
Frame: 5 1/4" deep box type, 12 gauge, painted steel; bolted-in cross-members; color = dark green
End Drive: Under slung Right Hand with 4" dia. lagged drive pulley; 1-7/16" dia. shaft. Left Hand drive
Motor: 3/4 HP; C-face, 208/230/460/480 volts/ 60 cycle / 3 phase / totally enclosed. Air/Clutch Brake attached to motor
Speed: Unknown fpm – fixed
Belt: 24" wide; PVC-impregnated polyester carcass, smooth top; color = black
End Pulleys: 4" diameter pulley on 1-7/16 diameter shaft
Return Rollers: 1.9" diameter, 16 gage galvanized steel with 7/16" hex SR bearings
Pop-Out Safety Rollers: .19" diameter, 16 gage galvanized steel with 7/16" hex SR bearings, located at charge/drive end of the conveyor
Intermediate Lengths: (1) 2'-6"
End Assemblies: (1) Drive / (1) Idler-adjustable
Supports: not included
Guard Rail: not included
